The IBU2 Truck is a Multi-Function Controller for Radio Controlled Trucks, featuring realistic sound(1) effects and lighting(2) all from a hobby grade 4 channel radio set (AM, FM, 2.4Ghz)
- Sound effects are fully user definable via supplied microSD card, so any type of truck can be selected or something totally unique.
- Fully synchronized sounds with truck actions, including engine startup and shutdown, rev up, brake, reverse beep, horn, indicators, change of speed, gear selection, air discharge, trailer hook up, and many more.
- User settings changeable via the supplied microSD card, no special software required.
- User can define top speed 0-100%
- User can define restricted reverse speed for added realism. 0-100% based on set forward speed
- Compactable with Tamiya lighting tractor unit and trailer units.
- Lighting effects controlled via the remote using 4 channel radio set. Including hazards, head lights and tail lights, high beam, fog lights.
- Automatic synchronized features like reverse beep and reverse light during reversing, brake sounds and brake light when braking, indicators during slow speed turns.
- Cab vibration unit(3) control for realism. User changeable settings via supplied microSD card.
- Modern ESC allowing ultra realistic speed control even at slow speeds. And higher efficiency allowing longer battery run time.
- User changeable protection. IBU2 Truck protected by 2A fuse and 10A fuse for ESC. No more sending back to manufacturer for repair after accidental electrical short.
- Built in battery monitoring to protect your batteries.
- Supports 2S LiPo, Ni-Cd, Mi-MH batteries.
- Optional audio upgrade unit, allowing twin speakers and twin volume control. 1 dedicated to engine, 1 dedicated to sound effects each rated at 6w.
- Small dimensions at 103 x 65 x 25mm, leaving more space in cab for interior detail.
1 Supplied with 5w speaker
2 Lighting kit sold separately
3 Vibration unit sold separately
We now have over 25 available truck sounds to select from and all are included with every IBU2 Truck. The list of include are
6x6 Army Truck
DAF XF Euro 6
Iveco Stalis 500
Kamaz 63501 8x8
Opel Blitz 3 Tonner
Scania 140 Super V8
Ural 4320 6x6
Volvo FH16 Euro 6
Volvo VNL 780
And to further enhance custom-ability, included are a number of alternative horns and reverse alarms.
IBU2UM Truck module
The IBU2Truck has been redesigned from the ground up on this new version.
Along with this version been smaller than the previous version it packs even more features. All the features of the IBU2Truck are still there plus these.
3 Speed gearbox emulation
High beam flash
Separate switch lights, side lights, headlights, high beams, fogs, roof lights.
Light outputs sockets independently powered so can use different colour/power LED’s without effecting other.
IR output for wireless trailer module
7-12v operating voltage. With low/high voltage battery protection
Changeable sounds, backward compatible with previous truck sound files.
Various settings can be adjusted
Smoker control for realistic exhaust
Can set max speed in each forward gear and reverse
System automatically selects 1st gear when reversing, or after braking.
No special software needed to make change sounds or settings
Intuitive voice led commands to calibrate radio with unit
8 channel input, 10 channel with iBus receiver
Can control external speed controller
2 Auxiliary servo outputs for more features on the truck. Diff locks, etc
4 user sound effects (no limit to length)
Volume control from radio handset (provided radio has enough channels)
High power 15w class D sound amplifier
Greater braking force when trailer attached (needs trailer coupler switch)
User can update firmware themselves without need for additional equipment (microSD card read/write needed)