New design/products will be added as become available.
Excavator Attachments.
For Huina 1580, Magom 330D Quick Release
Excavator Loading Bucket
3D Printed bucket for excavator. Select your model below for correct connection mount.
Dimensions (Huina)
Widths 80mm
Height 82mm (including bracket)
Depth 105mm
Dimensions (Huina XL & Magom Version)
Widths 105mm
Height 108mm (including bracket)
Depth 131mm
Notes
Printed under license with FMD RC Construction
May contain sharp edges
No instructions provided
It is recommended to 2mm pilot drill before screwing in the fixing screws into 3DP parts
These are printed to order so please allow a few more additional days before dispatch
Colour variations may occur between batches
RCTE reserve the right to revise or remove the product without notice
Excluded from our returns policy
Excavator Sorting Bucket
3D Printed bucket for excavator. Select your model below for correct connection mount.
Dimensions
Widths 105mm
Height 74mm (including bracket)
Depth 107mm (including bracket)
Notes
Printed under license with FMD RC Construction
May contain sharp edges
No instructions provided
It is recommended to 2mm pilot drill before screwing in the fixing screws into 3DP parts
These are printed to order so please allow a few more additional days before dispatch
Colour variations may occur between batches
RCTE reserve the right to revise or remove the product without notice
Excluded from our returns policy
Excavator Toothed Bucket
3D Printed bucket for excavator. Select your model below for correct connection mount.
Dimensions
Widths 141mm
Height 63mm (including bracket)
Depth 83mm (including teeth)
Notes
Printed under license with FMD RC Construction
May contain sharp edges
No instructions provided
It is recommended to 2mm pilot drill before screwing in the fixing screws into 3DP parts
These are printed to order so please allow a few more additional days before dispatch
Colour variations may occur between batches
RCTE reserve the right to revise or remove the product without notice
Excluded from our returns policy
Excavator Grading Bucket
3D Printed bucket for excavator. Select your model below for correct connection mount.
Dimensions
Widths 143mm
Height 63mm (including bracket)
Depth 83mm
Notes
Printed under license with FMD RC Construction
May contain sharp edges
No instructions provided
It is recommended to 2mm pilot drill before screwing in the fixing screws into 3DP parts
These are printed to order so please allow a few more additional days before dispatch
Colour variations may occur between batches
RCTE reserve the right to revise or remove the product without notice
Excluded from our returns policy
Excavator Trench Bucket
3D Printed bucket for excavator. Select your model below for correct connection mount.
Dimensions
Widths 41mm
Height 74mm (including bracket)
Depth 107mm
Notes
Printed under license with FMD RC Construction
May contain sharp edges
No instructions provided
It is recommended to 2mm pilot drill before screwing in the fixing screws into 3DP parts
These are printed to order so please allow a few more additional days before dispatch
Colour variations may occur between batches
RCTE reserve the right to revise or remove the product without notice
Excluded from our returns policy
Excavator Pallet Lift
3D Printed pallet lift for excavator. Select your model below for correct connection mount.
Available with 3 pallets or without pallets included. Select below.
Additional pallets available here.
Folk Dimensions
Widths 10mm
Height 54mm
Length 88mm
Notes
Printed under license with FMD RC Construction
May contain sharp edges
No instructions provided
It is recommended to 2mm pilot drill before screwing in the fixing screws into 3DP parts
These are printed to order so please allow a few more additional days before dispatch
Colour variations may occur between batches
RCTE reserve the right to revise or remove the product without notice
Excluded from our returns policy
Huina Crane Lift Arm
3D Printed crane arm for Huina 1580 excavator.
Dimensions
Length 150-300mm
Height 50mm
Depth 50mm
Notes
Printed under license with FMD RC Construction
May contain sharp edges
No instructions provided
It is recommended to 2mm pilot drill before screwing in the fixing screws into 3DP parts
These are printed to order so please allow a few more additional days before dispatch
Colour variations may occur between batches
RCTE reserve the right to revise or remove the product without notice
Excluded from our returns policy
Huina Grading Beam
3D Printed grading beam for Huina 1580 excavator.
Dimensions
Widths 150mm
Height 45mm
Depth 118mm
Notes
Printed under license with FMD RC Construction
May contain sharp edges
No instructions provided
It is recommended to 2mm pilot drill before screwing in the fixing screws into 3DP parts
These are printed to order so please allow a few more additional days before dispatch
Colour variations may occur between batches
RCTE reserve the right to revise or remove the product without notice
Excluded from our returns policy
Huina Pipe Grab
3D Printed pipe grab for Huina 1580 excavator.
Requires crane arm (sold here) to operate.
Dimensions
Widths 40mm
Height 106mm
Depth 50mm
Notes
Printed under license with FMD RC Construction
May contain sharp edges
No instructions provided
It is recommended to 2mm pilot drill before screwing in the fixing screws into 3DP parts
These are printed to order so please allow a few more additional days before dispatch
Colour variations may occur between batches
RCTE reserve the right to revise or remove the product without notice
Excluded from our returns policy
Diorama
Road Works Sign (4 Pack)
3D Printed road work sign, unpainted.
Contains 4 signs.
Dimensions
Widths 57mm
Height 50mm
Depth 3mm
Notes
Printed under license with FMD RC Construction
May contain sharp edges
No instructions provided
It is recommended to 2mm pilot drill before screwing in the fixing screws into 3DP parts
These are printed to order so please allow a few more additional days before dispatch
Colour variations may occur between batches
RCTE reserve the right to revise or remove the product without notice
Excluded from our returns policy
Traffic cone 10 pack
3D Printed traffic cone, in orange
Dimensions -
50mm Long
20mm Wide
20mm High
3DP cone pack contains
10 x Traffic cones
Note
May contain sharp edges
No instructions provided
It is recommended to 2mm pilot drill before screwing in the fixing screws into 3DP parts
These are printed to order so please allow a few more additional days before dispatch
Colour variations may occur between batches
RCTE reserve the right to revise or remove the product without notice
2 Pack of Oil Drum
3D Printed oil drum
Dimensions @ 1/14 scale
40.86mm Diameter
60.79mm High
Dimensions @ 1/16 scale
35.75mm Diameter
53.2mm High
Pack contains
Oil drum x 2
Note
Some tidying up of finish maybe necessary
No instructions provided
These are printed to order so please allow a few more additional days before dispatch
Colour may vary
(Twin Pack) Portable Road Barrier @ 1/14 Scale
Now available in twin pack containing 1 red and 1 white barriers
Dimensions
112mm Long
36mm Wide
42mm High
Pack contains
Portable road barrier x 2
Note
Some tidying up of finish maybe necessary
No instructions provided
These are printed to order so please allow a few more additional days before dispatch
Colour variations may occur between batches
RCTE reserve the right to revise or remove the product with out notice.
2 x Portable Pedestrian Barrier @ 1/14 Scale
Available in red
Dimensions
120mm Long
20mm Wide (3mm excluding feet)
63mm High
Pack contains
Portable pedestrian barrier x 2
Feet x 4
Note
Some tidying up of finish maybe necessary
No instructions provided
These are printed to order so please allow a few more additional days before dispatch
Wide Load Marker Board (4 Pack)
3D Printed wide load marker boards, finished white and red on front and white on back.
Contains 4 boards.
Dimensions
Widths 30mm
Height 30mm
Depth 3mm
Notes
May contain sharp edges
No instructions provided
It is recommended to 2mm pilot drill before screwing in the fixing screws into 3DP parts
These are printed to order so please allow a few more additional days before dispatch
Colour variations may occur between batches
RCTE reserve the right to revise or remove the product without notice
Excluded from our returns policy
Euro Pallet (2 Pack)
3D Printed euro style pallet 2 pack. Colour of print may vary.
Contains 2 pallets.
Dimensions
Length 85mm
Width 57mm
Height 10mm
Notes
May contain sharp edges
No instructions provided
It is recommended to 2mm pilot drill before screwing in the fixing screws into 3DP parts
These are printed to order so please allow a few more additional days before dispatch
Colour variations may occur between batches
RCTE reserve the right to revise or remove the product without notice
Excluded from our returns policy
Now Available.
|
|
|
|
|
|